• Home
  • About CropTec Show
  • Contact CropTec Show
Land Drainage has become an increasingly important item on the agenda on many UK farms over the last few years with some particularly wet seasons causing dramatic issues with regard to arable operations. This situation has reared it’s head once again this week with Storm Angus battering much of the UK and causing widespread flooding issues. In many cases, yields have suffered as a result of these wet conditions and the management of wet land has proved problematic - particularly when trying to undertake major operations such as harvesting or cultivations.

Many UK Farms are now embarking a period of sustained reinvestment in land drainage within the their fields - replacing drains that were last installed many years ago. Tim Sisson, Managing Director of William Morfoot Ltd comments, “There is a general acceptance amongst many progressive growers that these old drainage schemes are now not delivering. In order to obtain the top yields that they are looking to drive out of their land, there is an increasing recognition that farm drainage schemes need to be reviewed and where necessary, replaced.”

The typical yield uplift of between 25-35% which follows the implementation of a new drainage scheme is significant meaning that a lot of growers are now placing the investment in drainage higher up their priority list. “Having soils in good condition represents the very core of successful crop production,” continues Mr Sisson. “This back to basics approach has seen a lot of our customers prioritising drainage investment ahead of other items in recent times. The yield uplift speaks for itself and the fact that it makes the land easier to manage is also a massive bonus - particularly at a time when many farms are block cropping their land to gain obvious efficiencies in a time of tight margins.”

With blackgrass control also dominating much of the arable headlines at the moment, there is also widespread recognition of the fact that poorly drained soils are producing ideal soil conditions for blackgrass to thrive within. As such, owning well drained soils is being viewed as a critical starting point for blackgrass management - along with the other set of tools available to farmers including well planned crop rotations and delayed drilling where necessary. Feedback from clients who have recently completed comprehensive drainage schemes within blackgrass infested areas is that blackgrass management has been notably more successful following the implementation of the new drainage schemes.

William Morfoot Ltd are exhibiting on stand 202 at Croptec and will have a team of drainage specialists on hand to discuss how land drainage investment can drive out higher yields on your farm. Detailed technical advice will be available on how new drainage projects can be delivered along with further yield data relating to recent drainage projects that the company has implemented.

CropTec 2016

We also have over 140 exhibitors at the event displaying the latest science and technology across the trade stands, while CropTec’s well established seminars and hubs will feature the latest thinking on a range of key arable topics delivered by leading specialists.

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.
MagGrow, sponsor of the CropTec Spraying Technology Hub, will be introducing its spray drift reduction concept at CropTec, and also hopes to be demonstrating it live at the event.

MagGrow Global is a pioneering, patented magnetic spraying technology system for the agricultural industry. Its innovative technology provides superior coverage to conventional crop spraying systems and also reduces spray drift by up to 80%.

The MagGrow technology system is based upon the premise of attaching magnetic inserts onto a sprayer which imparts an electromagnetic charge into the sprayed liquid.

All living plants and soil have a magnetic field and so the magnetically charged liquid is attracted to its target.

The superior drift control and coverage provided by MagGrow’s technology means that profitability is increased through reduced pesticide wastage, productivity is improved through increased spray windows while supporting environmental regulations and a better environment.

In addition, field studies of MagGrow’s technology on commercial farms in The Netherlands, Kenya and Ethiopia have demonstrated reduction in water usage, reduction in disease pressure, increased spray capacity and reduced labour input due to fewer changeovers of the sprayer, and less waste and environmental contamination.

MagGrow products

The MagGrow crop sprayer system has no moving parts and our MagGrow Crop Sprayer System is easily installed and maintained.

The number of individual parts required is dependent on the size of the crop sprayer. A typical 24m crop sprayer would require a minimum of 6 main magnet housings, 1 boom arm magnet housing per boom section and 1 nozzle adaptor per nozzle.

MagGrow’s product is sold in the form of a retrofit kit that can be easily installed onto all manufacturer sprayer types (www.maggrow.global).

The MagGrow greenhouse Backpack Sprayer includes our pioneering MagGrow technology coupled with our unique application technique to optimize spray operations while maximizing operator comfort.

  1. MagGrow harness and frame

    Ergonomic design

    Adjustable harness

    Magnet housing unit mounted to frame
  2. MagGrow boom

    Length 1.75m with maximum spray band of 2m

    3 Detachable booms

    Vertical or horizontal orientation
  3. Nozzle adaptor

    Compatible with any nozzle selection

    Swivel holder for individual spray angle adjustment

    Built in shut-off valve
  4. Maximum unit weight 7kg

The key benefits are:
  • Increased profitability
  • Increased Productivity
  • Better environment
  • Supports regulation

About MagGrow

Based in NovaUCD, the hub for new ventures and entrepreneurs at University College Dublin, the firm was founded by brothers Gary and David Wickham and business consultant David Moore. MagGrow’s innovative magnetic technology is aimed at commercial arable farmers and horticultural producers as well as smaller establishments. As well as winning the Thrive Accelerator at the most recent Forbes Ag/Tech summit, MagGrow were also recently awarded the Environmental award at the LAMMA, the UK’s biggest agricultural and machinery show.

CropTec 2016

Make sure to visit MagGrow on stand 182 to find out more about their magnetic spray drift reduction and watch their demonstration in the Spraying Technology hub on the live feeds.

The Spraying Technology hub includes outdoor spraying demonstrations, commentaries and presentations how to avoid drift; new technology; approved stewardship schemes, safe and NRoSO knowledge trail. New feature for 2017, 
a live feed from various points on sprayer demonstrations will be fed into screens in the hub.

We also have over 140 exhibitors at the event displaying the latest science and technology across the trade stands, while CropTec’s well established seminars and hubs will feature the latest thinking on a range of key arable topics delivered by leading specialists.

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.
CropTec is the essential technical and business event for arable and mixed farmers and returns to the East of England Showground on the 29th and 30th November 2016.

More than 100 exhibitors will display the latest science and technology across the trade stands. Add topical seminars, business, grain and spraying technology hubs to the mix and CropTec is set to be one of the UK’s leading agritech events – agritech innovation and incubation hub, Farm491, is excited to join the lineup.

Farm491 officially launched earlier this autumn with the first phase of the enterprise development, Trent Lodge, opening its doors to members. Developed as a co-working environment for innovators to grow their businesses by applying technology to agriculture, the Farm491 business will be providing high-spec facilities to foster entrepreneurship, ideas generation and collaboration. It also includes access to 491 hectares of farmland for practical testing of ideas and members will gain exclusive access to RAU’s extensive support and knowledge network that includes farmers, entrepreneurs, investors and academics – as well as farming data, research, equipment and resources.

Farm491 has access to over 1,000 acres of farmland and upon completion in 2018, will comprise of two dynamic innovation spaces - practical workspaces in a converted farm barn and a state of the art technological centre.

A diverse mix of agritech entrepreneurs have already signed up for Farm491 membership. These

businesses include technologies looking at; drone surveying, land management mapping, equine behavioral tracking to online machinery rental and commodity trading platforms. The mix of ideas and cutting-edge innovation is extremely exciting, with many of these technologies shaping and carving the future of British agriculture.

Angela Simkins, Centre Director of Farm491 will be at CropTec chatting with and meeting visitors at the show. She and the Farm491 team will be joined by member, PFLA, Farm-r and SRUAV, sharing some of the innovations from current Farm491 members.

Angela said; “The Farm491 team are delighted to be exhibiting at CropTec 2016 – and we’ll be promoting some of our members’ innovations on the stand. Technology already plays a fundamental role in agriculture. From automated machines with intelligent sensors, electronic identification to apps and IT software –

technology is at the core of farming. Not only does it free up the farmer from the field, but technology is streamlining efficiency and making our farming systems even more dynamic and world-leading. Please join Farm491 at CropTec and learn more about how we may be able to support your agribusiness.”

CropTec 2016

Make sure to visit Farm491 on stand 161 to discuss their enterprise development.

We also have over 140 exhibitors at the event displaying the latest science and technology across the trade stands, while CropTec’s well established seminars and hubs will feature the latest thinking on a range of key arable topics delivered by leading specialists.

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.
Farm491, a high-tech, modern, cutting-edge enterprise hub at the Royal Agricultural University (RAU) promoting agritech innovation has launched, with access to its office space now available.

Stimulating a Community of Innovation

Developed as a co-working environment for innovators to grow their businesses by applying technology to agriculture, the Farm491 business will be providing high-spec facilities to foster entrepreneurship, ideas generation and collaboration. It also includes 491 hectares of farmland for practical testing of ideas and members will gain exclusive access to RAU’s extensive support and knowledge network that includes farmers, entrepreneurs, investors and academics – as well as farming data, research, equipment and resources. 

Farm491 covers over 1,000 acres of farmland and will comprise of three dynamic innovation spaces - a converted lodge for modern office space, practical workspaces in a farm barn and a state of the art technological centre. Together the three developments will form one of the UK’s most sophisticated and advanced facilities for pioneering agritech research and innovation, helping many start-up businesses flourish.

Open for Business: Trent Lodge Office Space Ready for Occupation

Trent Lodge forms the first part of the project - now designed and developed, the first floor of this modern office space is ready to open its doors to aspiring entrepreneurs. An official launch of the complete building will take place in September, but due to pressing demand for its space and with businesses already waiting to move in, Trent Lodge is excited to welcome its first occupants! The farm barn is scheduled to open later this year and the technology centre will follow in 2017.

Whether businesses would like to use the space for ‘hot-desking’, retain a permanent work base, or utilise support and share ideas amongst industry peers, Trent Lodge offers a flexible, inclusive working environment. It can also facilitate virtual working for those who are located further afield. Membership is based on a hierarchal system providing different levels of support or facility to suit budgets – bespoke packages can be tailored according to individual needs. A membership fee is paid each month, ranging from £50 to £300 per month – and for full fee paying students at RAU who wish to start up their own agritech business, Farm491 membership is completely free.

Angela Simkins, Farm491 Centre Director said: “The objective of Farm491 is to create a sense of creativity, imagination and pioneering innovation within the agritech industry. We want to help and support entrepreneurs trial new initiatives, test new technological solutions and offer a practical working space for the sharing of knowledge.”

Farm491 is an exciting opportunity for agritech start-ups, individuals, farmers, scientists and innovators who may be looking for a space, technical support and access to technology to test an innovation – whilst others may simply like to network and share thoughts amongst industry peers to get an idea off the ground. The space is inclusive, open to all and will become home to innovators, from all scale of sizes.

Angela concludes: “The agricultural industry is being driven by a ‘technological revolution’ with more technical equipment and intelligence being integrated into daily farming life. In order to remain efficient, competitive and for us to sustainably feed a growing global population, agriculture has to embrace technology – and Farm491 aims to facilitate that. Our aspiration is to create a vibrant community of innovators with the potential to influence and benefit the wider agricultural and food production industries.”

CropTec 2016

Make sure to visit Farm491 on stand 161 to discuss their enterprise hub.

We also have over 140 exhibitors at the event displaying the latest science and technology across the trade stands, while CropTec’s well established seminars and hubs will feature the latest thinking on a range of key arable topics delivered by leading specialists.

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.

Allmet is helping its customers to reduce drying costs and increase drying capacity thanks to the launch of the Intelligent Dryer Control (IDC) System.

This latest technical advance brought to the UK market is the result of Allmet's alliance with Tornum AB, a strategic business partnership that has seen the two companies share expertise and resources to focus on product research and development.

The IDC, is long-awaited in the grain market and will benefit customers by minimizing over drying, maximizing obtainable product quality, weight and prices and providing total process control.

Allmet Director, Charles White explained: "Drying grain precisely is a complex process that you want to get right to maximise the best possible price. When you use manual methods you run the risk of not reaching the desired moisture content levels, or over drying. The IDC takes the guess work out of this by maintaining the average outgoing moisture content of the grain, despite large variations in incoming moisture content."

To illustrate the benefits of the IDC - overstepping the mark by drying to 13 percent instead of 14 can typically add up to 20 percent to your energy bill, give you an additional 1% loss in weight and reduce your dryer's capacity by up to 16 percent.

Fellow Allmet Director, James White added: "The IDC optimizes the drying process by using intelligent software that adapts to conditions. There's no need for manual adjustments you have total control over the drying process and can change the grain type and drying recipe where ever you are, at the touch a button either from a PC or a tablet." 

Available in four different standard kits, the system consists of moisture sensors and a control unit with a user friendly interface. The first sensor is positioned in one of the upper drying sections and measures incoming moisture. The second is placed in the cooling zone, close to the dryer outlet. Using information about incoming and outgoing moisture content, the control unit sets the speed of the dryer discharge to obtain the desired moisture content out of the dryer - regardless of outside climatic conditions. 

For more information about the IDC contact Allmet on 01325 378008.


CropTec 2016

Make sure to visit Allmet on stand A25 to discuss their IDC system.

We also have over 140 exhibitors at the event displaying the latest science and technology across the trade stands, while CropTec’s well established seminars and hubs will feature the latest thinking on a range of key arable topics delivered by leading specialists.

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.



Visitors to the Agrii stand at CropTec will have the opportunity to win two tonnes of seed of new, very high yielding malting barley, Laureate for 2017 planting courtesy of Syngenta and MasterSeeds.

Yielding only fractionally behind RGT Planet in the latest five-year AHDB Recommended List trial data, Laureate has the advantage of being non-GN for the widest market suitability.

The Syngenta variety is being registered across Europe for the broadest market appeal and is currently under test by IBD for both brewing and malt distilling to give it significantly greater marketability than current malting standard, Propino.

“As well as all the right quality and yield characteristics, Laureate has the highest untreated grain yield on the RL courtesy of its very strong across-the-board disease resistance as part of an excellent agronomic package,” noted Agrii national seeds manager, Barry Barker.

“The two tonnes of seed we are offering in our free-to-enter CropTec competition will be sufficient for just over 10 ha of planting at normal rates, making it a very attractive prize for anyone planning to grow spring barley in 2017.”

CropTec 2016

We also have over 140 exhibitors at the event displaying the latest science and technology across the trade stands, while CropTec’s well established seminars and hubs will feature the latest thinking on a range of key arable topics delivered by leading specialists.

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.

The ability to lift pigeons off rape crops up to 300 meters away and scare all the crows within sight were instant results of farm trials of a new bird dispersal system, carried out by distributors Martin Lishman. 

Birds are a major cause of damage to crops. Preventing this can be difficult and time consuming, and failure to do so can be expensive, so Scarecrow Bio-Acoustic Systems have introduced a new system called Bird Instinctive Reactive Dispersal (B.I.R.D.). With previous models proven to be a valuable tool for famers, the new B.I.R.D. system offers the latest refinement of bird deterrent technology, increased dependability and further options to expand the system.

The Scarecrow B.I.R.D. System works on the principle of broadcasting digitally cleansed natural bird distress calls through three channels of loudspeakers. The system creates an environment which is hostile to birds, but at the same time is humane and inoffensive. The distress calls are played at natural sound levels which the birds are affected by but they are not intrusive and often remain unnoticed in places where the public is present, which in turn opens up a wider range of placement options.

Ten of the most commonly used distress calls from the Scarecrow library have been pre-loaded into the B.I.R.D. system. Calls recorded from pest species such as Pigeons, Crows and Rooks are on hand and ready when needed; additional pest species include Starlings and two Goose calls. The user simply programs the calls required to tackle the problem, and the fully automatic random play system continues to work without human intervention. The new B.I.R.D. system comes with two additional operating modes to ensure all the birds are removed. “Re-Enforce” mode is used for more stubborn birds and “Severe” mode is used to tackle situations when birds have become comfortable at the site for an extended period of time. All modes can be set to randomise 24/7 or utilise the built-in or remote light sensitivity sensor for ‘Dusk to Dawn’ operation. The system is controlled with a user friendly control panel which can be electronically locked to prevent tampering with the system.

The new B.I.R.D. system offers a much more flexible product. The main console is now a self-contained unit to which components such as the loudspeakers, light sensitivity sensor and power supply from either a leisure battery, mains or solar panel are connected. This separate component layout is beneficial in helping meet different location and mounting options, with the added ability to extend the system by adding up to 30 loudspeakers to accommodate larger premises and ensure all-round coverage. All components and electrical connections are fully IP rated to ensure they can withstand the harshest of weather conditions.

Justin Stafford, who farms at Little Bytham, near Stamford, Lincs, was very impressed with the performance of the new B.I.R.D. system. “In the rape, the pigeon sound completely cleared 400 birds and they have stayed in the wood ever since. You can see a clear difference between my field and my neighbour’s field which the B.I.R.D. system does not cover.”

CropTec 2016

Make sure to visit Martin Lishman on stand A12 to discuss the new B.I.R.D system.

We also have over 140 exhibitors at the event displaying the latest science and technology across the trade stands, while CropTec’s well established seminars and hubs will feature the latest thinking on a range of key arable topics delivered by leading specialists.

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.


Using Schulte Fixed Knife Technology, Stubble & Crop residue is driven into stationary knives, mounted in strategic positions under the deck of the cutter by free swinging blades set moving at speeds of up to 4,800 meters per minute. Increasing the chopping & mulching action of a rotary cutter.

Mounted baffle distribution plates direct the mulched materials out of the cutter with an even spread.

The stationary fixed knives are protected by shear bolts which allow them to pivot when required. The free swinging blades are each protected individually by slip clutches.

Chopped stubbles aid direct drilling and strip tillage seeding, thanks to improved material flow through the drill and less opportunities for seed ‘hair pinning’, along with a shorter length of stubble.

Chopped & Mulched stubbles see quicker residue decomposition and weathering.

Fixed Knives can quickly be removed to allow the rotary cutter to be used on grassland and for pasture management.

CropTec 2016

Make sure to visit Schulte on stand M26 to find out more about their Fixed Knife Technology.

We also have over 140 exhibitors at the event displaying the latest science and technology across the trade stands, while CropTec’s well established seminars and hubs will feature the latest thinking on a range of key arable topics delivered by leading specialists.

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.
Biog: Independent agronomist, photographer and software developer. Rural Cambs-based vegan chap who doesn't hassle others. Martyn’s photography, which can be purchased online, can be found here: www.blackthornarable.co.uk

Herbicide Resistance

Harvest 2016 was a mixed bag. By far the worst for us was winter barley; after a good couple of years, yields were well down, but people are more or less sticking with the crop, but I do feel that another bad year could kill it though.

It performs very well for us in the second straw slot on the edge of the Brecks, these light sandy soils, with high organic matter are terrible for take all and winter barley fits well in these situations. I find the hybrids are more robust when we get a dry season and input costs are lower than wheat so it’s a lower risk option.

Potatoes have been variable in yield, black dot is a challenge for the packing sector, but for most it will be a decent year financially, so growers can replace kit where needed, but I raise a word of caution – just watch the rise in crop area, chaps.

Sugar beet is doing well in many fields and we have some excellent yields, a good harvest and fields already drilled with wheat. 

Oilseed rape remains a challenge, the area well down on just three years ago and cabbage stem flea beetle (CSFB) is the deal breaker. Right now the crops sown on our light soils by the third week in August look great; frankly, though, it is not hard to keep crops like these intact.

I’m sensing with farmers a marked change in attitude, with a much more pragmatic approach and good adoption of ICM, although I suspect not many would say that is the reason.

As far as crop decisions are concerned, there is a noticeably greater uptake of varieties with better disease profiles. No longer are crop genetics chosen purely on yield.

Early harvest is now a key criterion for wheat growers and varieties like Graham, with a high score for tritici and early ripening should find favour. Another variety that is very popular this season is KWS Siskin.

The advice to growers to choose improved disease resistance seems to be working. No fields have been sprayed for phoma and DK Exalte in particular is looking stunning.

For those with blackgrass the switch to spring cropping has been marked, but we’ve found that spring beans do not have sufficient good chemistry to mop up surviving blackgrass plants, neither do they compete well allowing blackgrass to romp. Spring bean growers will be switched for winter beans for this reason. 

Delaying drilling is also a common feature and where we have now had a long run of using soil amendments such as compost on our heavier soils, they generally allow us a few extra drilling days. 


CropTec 2016

Herbicide resistance will be a big topic at this year's CropTec event, come and talk to our technical experts and listen to our seminars discussing how we can become more efficient. 

We also have over 140 exhibitors at the event displaying the latest science and technology across the trade stands, while CropTec’s well established seminars and hubs will feature the latest thinking on a range of key arable topics delivered by leading specialists.

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.
There have been numerous devices produced for checking the flow from boom sprayer nozzles over the years.  Up until now the majority have all required that the device is securely located over the orifice of the nozzle with a flexible cup so that none of the spray liquid escapes.  This has proved very difficult to achieve.  This new piece of equipment (FlowCheck) eliminates the need to seal the nozzle to the device.

Throughout the EU the regular testing of sprayers is now either mandatory or voluntary.  Under the SUD (Sustainable Use Directive*) from November 2016 all sprayers will require testing every five years until 2020,  from which time the interval will become three years, or as in the case of the UK an annual voluntary test will be carried out.  One of the components of the test is the flow rate of the spray nozzles.  Under the SUD all nozzles on a boom will be required to be tested whereas in the UK at least one nozzle on each boom section shall be tested for flow rate compliance.  Nozzles are required to be within +/- 10% of the manufacturers supplied data for that nozzle.  In the UK nozzle testing is carried out using a measuring cylinder and a stop-watch.  Nozzles are tested for 1 minute. This is both time consuming and inaccurate.  Inaccurate because, unless there is a flat horizontal surface on which to place the measuring cylinder errors may occur in viewing the position of the meniscus and in the case of the timing it is virtually impossible to remove the cylinder from under the nozzle at exactly one minute.  Only 1 second beyond or before could result in an error of +/- 1.66%.  The alternative is to remove all the nozzles and to test them on a dedicated device.  Whilst this is accurate it is nevertheless very time consuming.


What is FlowCheck?

BFS FlowCheck is a simple, low cost, but extremely accurate piece of equipment that enables the operator to check the flow output of a sprayer without the use of a measuring cylinder or stopwatch.  It has been tested for accuracy by the NSTS and has been given approval to be used as part of their tests.

FlowCheck allows quick, accurate and simple testing of the nozzles, in-situ on the boom.  Set the dial at the base of the FlowCheck to the nozzle size being tested e.g. 0.3, hang the FlowCheck(s) on the boom below the nozzle, several nozzles may be checked at the same time by using a  FlowCheck for each nozzle, turn on the pump, set the pressure to 3 bar and the FlowCheck will accurately measure the flow.

The FlowCheck consists of two concentric tubes, the inner one being open at the top and the outer being a clear plastic, with a graduated transparent nozzle flow rate chart fixed to the outside, just below the top.  The scales are colour coded and graduated for eight sizes of ISO nozzles. At the bottom of the tube is a rotatable disc with eight precision moulded orifices corresponding to the eight ISO nozzle categories 01,015, 02, 025, 03, 035, 04, 05, which are required to be tested. These nozzle sizes are visible on the disc and may be selected by rotating the disc to the appropriate position.  

The chosen orifice is then in the correct position to allow the device to be used to measure the flow from the selected nozzle size. This device simplifies and speeds up the checking of nozzles during a sprayer test.  

Many individual farmers will want to use the device to self check their nozzles prior to the start of the “season” or before the sprayer test is due.  If something is simple and quick to do, it is more likely to be done.

If you have any questions or would like to place an order, come and visit stand 181 at CropTec.

CropTec 2016

We also have over 140 exhibitors at the event displaying the latest science and technology across the trade stands, while CropTec’s well established seminars and hubs will feature the latest thinking on a range of key arable topics delivered by leading specialists.

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.
Data is an increasingly important asset for any business. By using data to inform decisions businesses can:

  •          Take actions in a timely manner
  •           Reduce risk
  •          Take advantage of opportunities to develop a competitive edge

Yara Analytical Services have been undertaking soil analysis (and foliar, petiol and organic matter analyses) for over 40 years and consequently have a large bank of data that can inform us of trends, widespread deficiencies and geographic nutrient information.

Data presents the same opportunities to farmers, but too often analysis taken is not acted on. A broad spectrum test delivers important intelligence to a farmer, giving you the opportunity to remove any limiting factor to your crops yield and quality. Don’t miss out – create a competitive advantage by acting on the information available to you.


Come to the Yara Stand 130 at CropTec and discuss how soil and crop data can help your business decisions.



Crop Nutrition Seminar sponsored by Yara 
11.30 – 12.40pm
Session chair: Mark Tucker, Head of Agronomy and Marketing, Yara UK
ADAS - RB209 – What to expect in the new edition?
RB209, the long-established guide for crop nutrition, is being revised to accommodate changing requirements, higher yielding crops and nutritional uptake.. Two experts among those reviewing and updating updating the guidelines, explain why change is required, the impact on crop profitability and how you can have your input on such areas as software compatibility.
Day 1: Sarah Clarke, ADAS Day 2: Susie Roques, ADAS
Nutrient Issues - Learnings from a ‘Big Dataset’
Nitrogen is the #1 nutrient for achieving average yields, however, consistent high yields are the consequence of understanding and reacting to other seasonal limitations – some we can manage, some we can’t. Jonathan Telfer will explore some findings from a ‘BIG DATASET’ held in the Yara Analytical Laboratory.
Jonathan Telfer, Business Development Manager, Yara Analytical Services
Nutrient Management - Measuring to Manage and Apply – A Farmers View
The individual with the hardest task is the farmer who has to collate and develop a practical nutrient strategy, often on a large scale, that balances nutrient demand and nutrient supply integrating soil and crop knowledge with the application of nutrients from AD residue and mineral fertilizers. Ian Rudge will give a farmer view on the strategy implemented at Bedfordia Farms and some of the tools used to fine tune their crop management.
Ian Rudge, Arable and Operations Manager, Bedfordia Farms
Biog: Chris Hewis manages a 280 ha mixed farm in Lincolnshire, growing winter wheat, winter and spring barley and winter oilseed rape. 40 ha of grass supports a suckler beef herd of approximately 65 continental cross cattle, producing stores. He was not born into farming, but was always very interested. “I remember visiting Riseholme College as a 9 year old primary school pupil and thinking how I would love to study there. Nine years later I did exactly that.” He has been in his current role since leaving college 28 years ago. He has been married to Katy for 23 years and has a daughter and two sons. He follows Grimsby Town Football Club, has an HGV license, is BASIS and FACTS qualified. He is involved with the local Rural Training Group and with #clubhectare as one of the original co-founders.

Title:      Blackgrass, Brexit and the quest for yield
The highs and lows of the 2016 harvest are still fresh in my mind as we start to feel the bite of winter. On the plus side, the wheat yield from the Reflection we grew was very good, barley samples were of a decent quality and the harvest was good, with all crops having stood well and weed-free. The big lowlight was oilseed rape yields that were 10% down on the five-year average for the farm.

Looking forward to next year’s crop, it’s been a strange autumn. We had a long, dry spell post-harvest that led to hard, dry, cloddy seedbeds in which very little blackgrass germinated. We then had a wet fortnight that encouraged a good flush of weeds as well as creating some ideal seedbeds for drilling. We deliberately delayed drilling by a month to help with managing blackgrass populations.

We’ve planted hybrid oilseed rape, sown conventionally following two passes with shallow discs. Winter Barley (Cassia) was sown following the plough, and our wheat was sown after min till cultivation.

Our approach to ploughing has now been reduced from 'Everything, always’ to twice in a five-year rotation, so now just for winter and spring barley.

Our wheat variety choices are all yield-driven because we are so close to the docks it doesn't make any sense trying to achieve small premiums on crops which then have to be transported inland at a increased haulage rate.

So our selection includes Dickens, because it has performed very well here for the last two years and is easy to manage. It stays clean, even when the weather makes it difficult to get fungicides on at the correct time, and it produces a good heavy sample of grain. We have continued with Reflection because it yielded so well and is quite early to harvest. Plus we have planted a small area of Marston because I like to try new varieties when I see one that performs well in trials.

Our approach with machinery and technology is focused on output and anything that reduces the quantity of inputs used without compromising output – essentially tools that allow us to specifically targeting those inputs to where they are needed.

Looking ahead to the challenges that we are most concerned about, they have to be blackgrass and the loss of active ingredients. BREXIT could be either a threat or an opportunity......who knows what the outcome will be, but I think it will be an opportunity as we are able to promote British produce around the world, produced to the highest of standards. 

CropTec 2016

Worried about the uncertainty that UK agriculture faces post Brexit? A visit to CropTec has never been more relevant. CropTec will provide professional advice from our technical seminars and exhibitors – the essential catalyst for profitable arable farming whatever barriers to production politics, the weather or fickle commodity prices put in its path. 

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.

A new control system designed to provide reliable drying of grain and other combinable crops with minimal manual intervention will be launched at the CropTech event by Kentra, one of the UK’s leading crop dryer manufacturers.

The Dryer Master DM510 control unit and software can be retrofitted to most continuous flow crop dryers or embedded into the control panel of a new Kentra dryer. Both installations use a pair of moisture sensors – one at the intake, one at the discharge point – to calculate and automatically adjust how long grain needs to spend passing through the dryer to achieve the target moisture level set by the operator.

Barry Higginbottom, Kentra managing director, says: “This proven technology from Canada can save valuable time otherwise spent monitoring and managing a dryer manually and can bring about significant savings in terms of energy use and unnecessary weight loss resulting from over-drying.”

The Dryer Master system comprises a highly accurate moisture sensor installed in the conveyor line taking grain from the dryer and an inlet sensor usually fitted at the top of a continuous flow dryer that detects changes in the moisture content of incoming grain. The control software uses the readings from these sensors to calculate the residence time needed to hit an average target moisture and adjust the discharge rate accordingly.

“The ability to predict when, say, wetter incoming grain will fill the dryer takes all the guesswork out of managing the system and results in more accurate and consistent drying,” says Mr Higginbottom.

“
With manual monitoring and control, you’re always working behind the curve, altering settings after the event – when the combine opens up in damper crop around a field boundary, for example, or as crops lose moisture after a dewy morning,” he adds. “With intake moisture sensing and predictive software, grain drying becomes more accurate and consistent.”

Both sensors automatically compensate for grain temperature to ensure accurate readings and calibrating the post-drying sensor involves nothing more than pressing a ‘calibrate’ button on the control panel, putting a couple of samples through a moisture meter and entering the readings.

“We don’t advocate a ‘set and forget’ approach; it’s good practice to have someone supervising the drying operation and we recommend repeating the sensor calibration two or three times a day as a check,” says Barry Higginbottom. “But the accuracy of this automated control system will give the store supervisor confidence to attend to other aspects of harvest management without neglecting the dryer.”

Significant cost saving is the other potential attraction of the system, he adds: “Manual grain dryer management involves responding to samples taken after the grain has been dried and to avoid being caught out there is a tendency to err on the side of caution, which often results in a lot of grain being dried beyond the optimum.”

That is costly in energy – bearing in mind it takes more energy to move grain from 14% to 13% mc than from 15-14% – and also in weight loss.

“Assuming a grain price of £100/tonne, a farm drying 20,000 tonnes of grain has only to save 1% moisture in over-drying to regain £20,000 in lost revenue,” Mr Higginbottom points out. “A farm drying 4-5000 tonnes of grain a year would recoup the £10,000-£12,000 all-in purchase of a Dryer Master system in three years – a bigger operator even sooner – while also saving time and hassle at harvest.”

The Dryer Master display provides a quick view of drying status and settings, a manual option for operators who prefer to make their own discharge rate decisions, a number of alarm alerts and a print-out for records. Where Internet access is available, the display is duplicated on a web browser accessible on a farm office computer or remotely via a smart phone or other mobile device.

CropTec 2016

Make sure to visit Kentra stand M19 at this year's event, taking place on the 29th & 30th November at the east of England Showground, Peterborough. 

We also have over 140 exhibitors at the event displaying the latest science and technology across the trade stands, while CropTec’s well established seminars and hubs will feature the latest thinking on a range of key arable topics delivered by leading specialists.

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.




Yorkshire precision farming specialist, Manterra Ltd will use the forthcoming CropTec show to share information about its TruNject project and to attract potential early adopters of its high resolution soil sensing technologies and liquid fertiliser point injection techniques.



TruNject is a three year project, funded by Innovate UK and led by Stockbridge Technology Centre in partnership with Manterra Ltd and Cranfield University. The project is researching unique fertiliser placement technology that will revolutionise the way that farmers apply nutrients to a range of field vegetables and combinable crops.

Manterra founder, Andrew Manfield is the applied technology partner who supplies precision farm technology and agronomic expertise to the project: “Tru-Nject uses a variety of tools including soil data, drone and satellite sensing data, RTK-GPS auto steering and revolutionary new proximal soil sensors to apply fertiliser below ground, thus creating that create a resource efficient way to apply nutrients whilst reducing the levels of nitrous oxide gas released from nitrogen fertilisers.

 “It is a very exciting project to be involved with. We have the potential to vary the nutrients on crops metre by metre and bed by bed, with an accuracy that is previously unheard of on a commercial level of practice.” 


Manterra Ltd was established by farmer and agronomist, Andrew Manfield in 2011 and has its foundations in a farming business that was established at the beginning of the last century. Manterra is also the sole UK distributor for Unia, an authorised reseller for Trimble precision agriculture products and Duport spoke wheel injectors.

CropTec 2016

Make sure to visit Manterra's stand M15 year's CropTec event.

We also have over 140 exhibitors at the event displaying the latest science and technology across the trade stands, while CropTec’s well established seminars and hubs will feature the latest thinking on a range of key arable topics delivered by leading specialists.

The event is free to attend for those visitors that pre-book their tickets. ALL visitors will be charged £15 on the day.



Newer Posts Older Posts Home
BOOK YOUR TICKET

FREE for pre-registered visitors to attend


BOOK A STAND

Place to meet and engage with on farm decision makers


NEWSLETTER SIGN UP

Sign up to the latest newsletters


SPONSORSHIP OPPORTUNITIES

Includes extensive onsite coverage and focussed coverage in the run up to the event

Twitter

Tweets by @CropTecShow

Popular Posts

  • Rooting & Crop establishment key to breaking yield barrier
    WITH continued pressure on plant protection products, establishing crops this coming season will be as challenging as ever. Growers are enc...
  • John Deere unveils new four-track 9RX Series tractors
    John Deere’s first-ever four-track tractor will be making its UK show debut at CropTec. The new top of the range 9620RX model on display fe...
  • MagGrow introduces magnetic spray drift reduction at CropTec 2016
    MagGrow, sponsor of the CropTec Spraying Technology Hub, will be introducing its spray drift reduction concept at CropTec, and also hopes...
  • Using Data to Inform Crop Nutrition Decisions
    Data is an increasingly important asset for any business. By using data to inform decisions businesses can:           Take actions in a...
  • Introducing BFS FlowCheck An Accurate, Quick and low cost way to check a Nozzle
    There have been numerous devices produced for checking the flow from boom sprayer nozzles over the years.  Up until now the majority have a...
  • Herbicide resistance
    Biog:   Independent agronomist, photographer and software developer. Rural Cambs-based vegan chap who doesn't hassle others. Martyn’s p...

Labels

ACS Farm Image adama ADAS ag chemicals agri chemicals Agri-Tech Agribusiness Agribusiness strategies agricultural Agricultural events Agricultural tractor agriculture Agriculture Bill agriculuture agrii Agrimoney LIVE agritech innovation agronomists agronomy Agrovista AHDB AHDB Monitor farm AHDB recommended list AICC air strike Allmet apv arable Arable 2017 Arable farmer Arable farmers arable farming arable varieties Arylex Active arysta arysta lifescience AutoForce automated autumn Azotic Technologies B.I.R.D barclays barley BASF BASIS Bauer Bauer ecostar Bauer Rainstar Bayer CropScience BDC Systems bean variety BeeConnected Beekeepers Bees Benchmarking Billericay Farm Services biomass maps biostimulant Biostimulants Bird dispersal system birds black-grass blackgrass Blackthorn Agronomy blight control BM start Brexit British farming buffer zone calibration catchment sensitive farming Cereal crops Cereals CF Fetilisers Chafer Chafer Interceptor Chafer self propelled sprayer chemicals Chemicals regulation division chopped cimbria clay Claydon claydon seed and fertiliser drill Clinic co-working environment combinable crops Commodities Commodity market outlook compaction Competition control Cope seeds copeseeds Corn costello coulter control sysyte Cover crops crop Crop Angel crop breeding crop damage Crop dryer crop establishment crop establishmnet crop genetics crop nutrition crop planting Crop production Crop protection Crop protection. crop science Crop technology crop variation Crop yields cropping cropprotect network crops CropTec CropTec exhibitor Croptec Seminar Programme crows crusoe CTIS System cultivation CXCS cymoxanil dairy farmerS Data Data analysis data recording David Lines defra destroy diesel irrigation disease disease management Disease resistance distress calls DM510 Dow AgroSciences Drill drilling drills Drones dryer DSV East of England Showground Efficiency Elsoms seeds enterprise hub enviromonitor environmental EU EU referendum EU Regulation europe excel exhibition expiry Farm Assurance Farm Business farm data Farm491 Farmer Farmer blog farmers farmers guardian farming farming technology Farming Fertiliser farming industry farming news Farming Online farming technology farms fertiliser fertiliser application Fertiliser spreader Field margins fixed knife Foliar foliar spray Forecast fuel efficiency fungi fungicide GA142 Garming Germinations glyphosate GM technologies GMO technology GPS Grain Grain dryer grain drying grain moisture grain quality Grain storage GrainDisease resistance grains Grange Machinery grazing cover crops Great Plains growers growth Hands Free Hectare Harper Adams University harvest Harvest 2016 Harvest 2017 harvest data harvest results harvest UK Harvest weed control Herbicide resistence herbicides herbicides. High Yielding high yields honey bees horitculture. Horsch Hot-desking Hutchinsons hybrid wheat IDC ilex import independant agronomists independent agronomists industry innovation infection Innovation Innovation. inoculants insecticide inserts Intelligent Dryer System investment InVigor irrigators ISOBUS John Deere Kantra kentra Knight Farm machinery KWS Laureate leaf leaf cover legislation livestock farming low disturbance machinery Maestro MagGrow Magnetic spray drift reduction Manterra Martin Lishman MasterSeeds metaldehyde milling wheat min-till mixed farms Nelson nematodes New Holland NFU Nitrogen no-till no-till. no=till nozzle Nozzle control Nozzles NSTS Nuffield Nuffield Farming Nuffield scholar Nutrient nutrition observations oilseed raiser Oilseed Rape Opico Opti-cal Survey Equipment Organic matter OSR OSRm Martin Lishman Pest and disease pesticide pests Petiol physio activator technology pigeons placebo Plant breeding plant coverage plant health plant nutrition platform plough POE potatoes Powrspray Precision precision agronomy Precision Decisions Precision farming Precision Sampling premiership prodata propamocarb proxanil R&D Red Tractor UK research results rooks rotary cutters rotation Rothamsted Royal Agricultural University RTK Rural Payments Agency Russ McKenzie Rye ryegrass Satellite satellite imagery scarecrow Schulte seed seed market Seeds Seminar Sencrop sensors septoria septoria clininc Septoria Forecasting septria clinic Skandia Sky drill skyfall Skyfall yields slug slug control slug pellets slugs Smart Scanner Smart Scanning soil Soil Analysis Soil health soil management soil. Soilquest Soya Soybean SOYL Sponsorship Sponsorship. spray spray control Spray nozzle sprayer Sprayer booms sprayer control sprayer demonstrations sprayers Spraying spraying systems spraying technology spreading Spring barley spring beans spring peas Star fire 3000 stationary knives stewardship stubbles sugar beet Sulky suppliers supply chain Svegma Syngenta tallowamine technical event technological centre Technology tillage Toby Bruce tool toolbar TractAir Tractor tractors trading Trent Lodge Trent Lodge Farms trials Trimble trophy Tru-Nject Tyre pressure UAV UK UK agriculture UK farming UK grain market variable seed varieties varieties. Voluntary Initiative water contamination water stewardship water stewardship. weather systems weed wiping weeds wheat wheat drilling wheat market wheat prices wheat production wheat variety wheat yields winter barley winter wheat workspaces yagro Yara yara UK yield yield data Yield protection yields zulu

Blog Archive

  • ►  2017 (40)
    • ►  October (4)
    • ►  September (9)
    • ►  August (8)
    • ►  July (3)
    • ►  June (3)
    • ►  May (2)
    • ►  April (1)
    • ►  March (6)
    • ►  February (4)
  • ▼  2016 (57)
    • ►  December (4)
    • ▼  November (25)
      • Drainage investment paving the way for yield impro...
      • MagGrow introduces magnetic spray drift reduction ...
      • Farm491 makes debut at essential technical event f...
      • Facilitating Innovation: New Agricultural Enterpri...
      • Intelligent Dryer Control System optimizes grain d...
      • Win 10ha of New Very High Yielding Spring Barley i...
      • The Crop Air Strike
      • Schulte Industries Brings Fixed Knife Technology t...
      • Herbicide resistance
      • Introducing BFS FlowCheck An Accurate, Quick and l...
      • Using Data to Inform Crop Nutrition Decisions
      • Blackgrass, Brexit and the quest for yield
      • New grain dryer control system simplifies harvest ...
      • Manterra to showcase TruNject precision farming pr...
      • Richard Hinchliffe - Herbicide resistance
      • New equipment for the X40+ and X50+ Sulky spreader...
      • 2016 Fertiliser trial results announced and new su...
      • Single nozzle switching achieves accuracy
      • Bauer features Rainstar irrigation and control dev...
      • Dry autumn leaves crops behind
      • The Crop Air Strike
      • Special Black-grass Management Clinic for CropTec
      • Seed Excels!
      • What will Brexit mean for crop protection?
      • BAYER PLANTS SEEDS FOR THE FUTURE AT CROPTEC
    • ►  October (12)
    • ►  September (8)
    • ►  August (3)
    • ►  July (1)
    • ►  June (2)
    • ►  May (1)
    • ►  April (1)
  • ►  2015 (27)
    • ►  November (6)
    • ►  October (8)
    • ►  September (6)
    • ►  August (5)
    • ►  July (2)
  • ►  2014 (19)
    • ►  December (1)
    • ►  November (9)
    • ►  October (3)
    • ►  September (6)
Powered by Blogger.

OPENING TIMES

Wednesday 29th November: 8.30am - 4.30pm
Thursday 30th November: 8.30am - 4.30pm

GET IN TOUCH

Email: admin@croptecshow.com
General Enquiries: 01772 799423

SMALL PRINT

Terms & Conditions
Privacy Policy


© Copyright 2015 Briefing Media. All rights reserved

Created By ThemeXpose| Distributed By Blogspot Templates